To find the right flex, it’s common to hit a golf ball with your driver to monitor carry distance, ball speed, clubhead speed, and other data factors. Here’s a breakdown based on amateur golfers from Golf.com.Did you know that the steel golf shaft has been around for nearly 100 years? While the original players of this sport used wooden shafts (which most of us can’t even imagine playing with), the R&A legalized the switch in 1929.
So, why did so many people make the switch from steel to graphite shafts? Because there are a ton of benefits – all of which make this complex game a little easier.
Yes, graphite shafts make a huge difference in your game. Switching from steel to graphite iron shafts can help you add distance, hit it higher, and increase your swing speed. While graphite shafts cost more, they’re a great investment in your game.
Since graphite shafts are much lighter, companies can layer the shaft at different angles to change stiffness but maintain the same weight. Plus, graphite shafts can help minimize face twisting and get the golf ball rolling at your target more often. It’s something to consider if you feel like your putter itself is great but need to get out of a putting slump.
However, Tiger was also one of the first players to start making golf workouts a normal part of the game. That being said, we don’t recommend swinging steel shafted woods anymore. It only makes the game more challenging and isn’t necessary with new technology.
Most high handicappers should avoid steel shafts entirely as they’re too heavy and hard to hit. According to Golf.com, “Tim Briand of True Spec Golf, approximately 75% of players he fits have the wrong shafts in their irons, the majority of which are too heavy and too stiff.”
It’s best to play shafts that match your skill level and swing speed. Some players will benefit greatly from playing graphite shafts while others need to play steel shafts.A typical steel putter weighs about 125 grams and to create one that is more flexible, manufacturers typically need to make the walls thinner, which also makes the shaft lighter. Conversely, to make a steel shaft stiffer, they need to make the walls of the shaft thicker, which adds more weight.” Custom fittings don’t cost that much ($100-$300 depending on the type of fitting/number of clubs) and are worth it. Remember, the wrong golf shaft or wrong shaft material can make a big difference in your game. Make golf easier by playing the right golf clubs! Picking your wood shafts are pretty straightforward compared to irons as pretty much every golfer plays graphite shafts. But with irons, you need to decide if graphite, steel, or possibly a multi-material shaft is right for you.The flex of steel shaft varies from regular to X-stiff and changes from manufacturer to manufacturer. Go here to learn more about regular vs stiff shaft flex and if you have a slower swing speed the senior flex shaft.I realize there’s a stigma attached to graphite, but you need to stop thinking of them as a product for your grandpa.” They even mentioned that Bryson DeChambeau and Abraham Ancer use graphite shafts in their irons.
What shafts does Rory McIlroy use?
What we found was a new shaft in his driver. McIlroy now has a Fujikura Ventus Blue TR 6 X shaft in his Stealth 2 driver. The change is intended to help him get more spin with his shortened 44-inch driver construction, he said.
Deciding between graphite and steel is one thing, but figuring out the flex of the shaft is another issue. There are tons of different options for shaft stiffness and it ultimately depends on your swing speed. The faster you swing the golf club (aka more club head speed), the more flex you need vs. slower swing speeds need more flex.Another big benefit to steel is that they’re heavier, which means a tighter shot dispersion. Essentially, your misses are in a smaller window than when you play lighter, graphite shafts. Steel shafts can weigh 1.5 to 2X what graphite shafts weigh, which also makes it easier to hit knockdown shots for optimal control.
It depends on your swing speed, current clubs, trajectory, and more. Most golfers would benefit from playing graphite shafts as they’re lighter, easier to hit, and tend to produce a higher ball flight. In the past, graphite shafts weren’t as accurate but as technology has evolved, you’re not sacrificing much now.The first reason graphite shafts became popular was because they were so much lighter than steel irons. It’s not uncommon for steel shafts to weigh twice as much as graphite shafts. Heavier weights are harder to swing faster!
Where are graphite design shafts made?
Graphite Design is located in the city of Chichibu, Japan, and has 33 years of experience designing and manufacturing premium graphite composite golf shafts.
Graphite shafts are much lighter than steel and can range from 50-90 grams. There are a lot more customization options with flex, color, shaft tip, and more.
Where is Project X shafts made?
Our Hand Crafted series of shafts are designed in an intimate lab environment in San Diego, CA. Hand Crafted is all about small batch at the highest quality by our most skilled technicians.
But eventually, pros and amateurs saw the light and started to switch to graphite. Now, graphite is more common for everyday golfers while professionals tend to only use them in their woods.
Do pros use stiff or extra stiff?
Most professional golfers use Extra Stiff Flex clubs, so unless you’re headed to Augusta National sometime soon, you likely don’t need one. But, if your average club head speed is 110 miles per hour or more and you’re consistently hitting with a distance of around 270 yards, an Extra Stiff Flex staff could be for you.
In today’s modern golf era, technology continues to change and innovate at a rapid pace. Despite steel being used for nearly a century, it’s still very common to see players using them on the golf course.It’s not uncommon for graphite irons to weigh half the amount of steel golf clubs. Lighter shafts are easier to swing faster, which leads to more clubhead speed, which corresponds to more total distance.
Tiger now uses both steel and graphite shafts. He uses steel shafts in his irons and wedges with graphite shafts in his woods like most professionals. His fast swing speed allows him to play incredibly stiff shafts too. Pretty much every type of golfer should play graphite shafts in their driver and fairway wood. But don’t forget, there are tons of different types of shafts as flex, weight, shaft length and tip flex all factor in too. If you’re a committed golfer, sometimes it’s worth doing a professional fitting or at least testing out different shafts with a launch monitor. Here’s a fact that might help you finally drop the stigma of using graphite once and for all. Bryson DeChambeau, the longest hitter on the PGA Tour in 2021 (before switching to LIV Golf), uses graphite shaft irons. Not only does he hit bombs with his driver, but he also hits his irons insanely long too.Some players can swing steel shafts their entire life while others prefer graphite from a younger age. There’s a lot of personal preference when it comes to picking the right shaft so do what’s best for your game, no one else.
Don’t play the wrong golf shaft anymore. It’s time to ditch the stigma of using graphite and instead, playing shafts that make golf easier. Don’t forget, some of the best players in the world with insanely high swing speeds choose graphite too.
For example, here’s my bag setup to show how the shaft weight changes depending on the club. I use graphite golf shafts in my woods, steel shaft irons, and steel shaft wedges. As you can tell, there is a lot that goes into finding the right golf equipment for your game. If you feel overwhelmed by this process or don’t have your own launch monitor, it’s not a bad idea to do a custom fitting. This usually lasts 1-2 hours where you hit your clubs vs. new clubs and different shafts to see distance, spin, accuracy, and tons more metrics. According to Golf.com, “A lot of graphite products perform like steel but offer some hidden benefits like vibration-reducing technology that’ll reduce wear and tear on your joints during those lengthy practice sessions.With a partly steel, partly graphite shaft you get the control of steel and the distance of graphite. Plus, they have built-in vibration-reducing technology to avoid any unwanted vibrations. It’s truly a win-win and something that I could see gaining popularity in the future for low handicap golfers.Let’s face it, golf isn’t getting any easier and playing stiff, heavy, steel shafts isn’t helping most players. Especially everyday amateurs who only get out a few times per month and rarely practice. Yet, despite the mountain of data that shows the benefits of playing graphite, some golfers just won’t make the switch.Go to our email list signup page to join over 10,000 golfers who receive our email list where we send out exclusive information only available to subscribers.Steel shafts are heavier than graphite and tend to weigh 120 grams or more per shaft. There are some lighter options now in the 100-110 gram range and some go as high as 140 grams. Professional golfers pretty much all play steel shafts in their irons with a few exceptions. They are the most consistent players on the planet and benefit from steel shafts as it helps with shot shaping and distance control. Pro golfers tend to use a graphite shaft only in their driver, fairway woods, hybrids, and possibly some utility irons. Composite shafts help with hard to hit clubs like long irons, which even the best players in the world struggle with at times. There’s no specific time to switch – for example, saying you’re 60 years old then you need to get graphite iron shafts. Instead, it’s about monitoring your swing, score, and ultimately your golf goals. Graphite iron shafts don’t tend to last as long as steel shafts since they’re much lighter but that doesn’t mean you’ll need to replace them often. For example, I’ve played the same shaft in my driver for years and play or practice 3-4X a week!
Do more pros use graphite or steel shafts?
Almost all professional golfers, both men, and women, will use graphite shafts in their driver, fairway woods, and hybrids. These are the clubs that are all about swing speed, ball speed, and launch.
Picking the right shaft for your irons, woods, and wedges has a massive impact on your ball flight and overall performance. Far too many golfers spend all their time and energy picking the right clubhead and settle for a generic shaft.
For a lot of golfers, switching to a lighter graphite shaft instantly added distance thanks to a faster swing speed. Since the club is significantly lighter, it’s much easier to swing faster and increase total distance (especially for high handicap golfers)BC Golf House found that, “Around 1820 clubmakers introduced hickory for making golf shafts. This wood proved to be more durable than the ash, apple, and beech wood that were being used. The process to make a golf shaft began by fastening a one inch square piece of hickory about four feet long in a lathe.
While players were quick to make the switch from wooden to steel, the switch from steel to graphite wasn’t quite as fast. Heck, I still remember Tiger Woods in the early 2000s swinging a steel shafted driver and making it look easy (he was also the longest hitter of any PGA Tour player).
Yes, a graphite iron shaft should increase distance, sometimes substantially for certain types of players. Golfers hit graphite shafts so much further than steel because they are so much lighter.For starters, you want to think about shafts for your woods, irons, and wedges. It’s not uncommon for all of them to be different weights and possibly different manufacturers. However, the flex of the shaft typically doesn’t change much.
Golf injuries are no joke. If you’re suffering from a back injury or have a lot of stiffness from golf, graphite shafts are the way to go. Adding these into each golf club will help you alleviate injury as they don’t provide as much vibrations up the shaft. This will help your wrists, hands, shoulders, and elbows.
Soon the spinning rectangular piece became a round spindle about ¾ inch in diameter. Finally, the clubmaker tapered one end to fit into the clubhead hosel.”
Where is Fujikura shafts made?
Where are Fujikura shafts made? Our shafts are prototyped in both Japan and the US by two teams of engineers. We wholly own two factories that are employed by Fujikura employees that produce Fujikura high-performance golf shafts.
The biggest benefit for steel shafts for most golfers is that you feel more vibrations with each swing. You get more immediate feedback on the shot, which helps you alter your setup or swing to hit your desired shot. But beginners won’t enjoy the vibrations if they hit it badly, especially in cold weather.
What is handcrafted project x shaft?
These handcrafted golfing shafts are like none-other offering reliability, strength, and power to your every stroke. Project X Shafts come in a variety of material types to help your golfing game during each round. If you are looking for more consistent carry distances and shots Project X shafts are just what you need.
Before getting into all things about steel shafts, don’t forget that golfers originally played with wooden shafts. Old-school shafts were ash or apple and hickory shafts became the rave soon after.Needless to say, if the longest hitter uses graphite shafts, maybe you could benefit too. If you’ve thought about switching and weighing the pros/cons of graphite vs. steel shafts, this article will give you all the information you need.
Overall, steel shafts are better for more advanced golfers with high swing speeds and a consistent overall swing. But as you’ll see in the next section, even some of the top guys in the world are now using graphite shaft irons.
If you’re still debating graphite or steel, this quote from Andrew Tursky, a senior equipment editor for Golf.com said it best, “I’ll go as far as saying that more than 50 percent of golfers would find better performance and a more pleasurable experience by switching to graphite. Composite shaft companies have made huge strides in creating iron shafts that mimic the dispersion of steel shafts, but provide more height, speed and better feel.”
Another unlikely benefit is that graphite shafts are simply easier on your joints. That’s right, there are health benefits aside from increased swing speed.
According to the same Golf College article, “In 1973 the graphite shaft was introduced which provided more rigidity, lightness and increased strength over the steel shafts. The more modern graphite shafts are manufactured with different materials to improve performance, such as boron to reduce twisting.”
They’re also usually cheaper than graphite shafts as they cost less to produce. If you’re looking to save money, steel is usually the way to go. Plus, they’re more durable and rarely, if ever, do you need to replace.
But I can still remember Tiger in his prime swinging heavy steel shafts not only in his 3 wood but also his driver. In 2004 he finally made the switch from steel to graphite in his driver.
Not only did he hit a steel shafted driver, he hit it extremely hard and was the longest hitter on tour. Most players in today’s modern game of golf can’t even comprehend doing that today.
The second benefit of a graphite shaft is that you tend to get a higher ball flight. This will help with longer clubs and overall, make it easier to hold the green more often.
Finally, don’t forget to check your wedge shafts too. It’s not uncommon to have your wedges as the heaviest shafts in your bag. A heavier wedge shaft makes it easier to flight shots down and take off distance when you’re between clubs.While most golfers should play graphite shafts for a variety of reasons, there is now a new option known as multi-material shafts. These use multiple materials/composite materials for a truly custom shaft. You get the best of both worlds with these as the majority of the shaft is steel, while the tip is graphite.
According to Golf College, “Around 1925 the steel shaft was introduced in the United States, although blacksmiths had experimented with them since the late 1890’s. The R&A finally legalized the use of steel shafted clubs after the Prince of Wales used them on the Old Course at St Andrews in 1929.”Your driver should be your lightest club in the bag, typically between 45-75 grams depending on skill level and swing speed. Your fairway woods will typically be slightly heavier (as you can see, my 3-wood is 10 grams more) and work your way up to irons.
If you want to play better golf, you need to play the right shafts. As you’ll learn today, that might mean swapping to lighter weights in graphite shafts. It’s time to drop the ego and use shafts that are right for your game.
Do not settle for any old golf shafts… especially if you’re a mid to low handicap golfer. The littlest things can make the biggest difference in your ball striking, confidence, and overall performance.
Are Project X shafts steel or graphite?
Project X has long been known for their highly-acclaimed steel iron shaft offerings that are widely played all over the world. There’s no question that they are one of the best in the business.
These players tend to use heavier graphite shafts than most everyday golfers and ones that are much stiffer too. The majority of PGA Tour and LIV golfers swing X-stiff or even TX (which is a special, Tour Stiff shaft).Thankfully golf manufacturers are constantly finding ways to make this challenging game a little easier with better shafts. Now, there are more options than ever when it comes to swinging the right shaft for your golf game. Wir verwenden Cookies, um Ihnen den bestmöglichen Service zu gewährleisten. Wenn Sie auf der Seite weitersurfen stimmen Sie der Cookie-Nutzung zu. Learn more. We’ve detected that JavaScript is disabled in this browser. Please enable JavaScript or switch to a supported browser to continue using twitter.com. You can see a list of supported browsers in our Help Center.
Let’s take a look at a standard set of P790 golf irons; there are two stock shaft options a True Temper Dynamic Gold 105 steel and a Mitsubishi MMT graphite shaft. The weights for the shafts are as follows. . .
If you have been playing golf for some time, you should know how far you hit your seven iron. Let’s say for years you have been hitting your 7 iron 150 yards, and this season you can’t get it to fly more than 140. High-handicap golfers should use a shaft that helps them gain more control, whilst still allowing for great distance. Typically speaking, all high handicap golfers will benefit from graphite shafts in their driver, woods and hybrids. Then it is down to swing speed and preference to decide between steel and graphite shafts in their irons and wedges. Professional golfers almost always use the golf shafts that fit the needs of their golf game the best, which can be either steel or graphite. The average professional will have five or more different shafts in their golf bag. It’s a good idea to break these down into the types of golf shafts so you can understand where they choose graphite shafts and where they choose steel.When it comes to control, there is a simple answer and a far more complicated one. The simple answer is that golfers will lose some control when shafts are too flexible and/or light for them. For many, this will mean heavier, steel-shafted clubs are best for control.
Shaft selection will also impact how the club feels during your swing. The club head can feel heavier/light and easier/hard to feel where it is all due to your shaft choice. This is a very subjective topic, but is well worth exploring during custom fitting.
There are some new steel shafts on the market that are incredibly lightweight and can get very close to the graphite iron shafts in terms of weight. Do you remember when there was a clear difference between the cavity back irons and the forged? Now that clear distinction feels a bit less clear as technology improves. The same is true with graphite shafts and steel shafts from a playability and performance standpoint.Britt Olizarowicz is a former teaching and Class A PGA professional with more than 25 years spent with a golf club in her hand. Britt is a small business owner, author, and freelance golf expert that knows this game inside and out. She lives in Savannah, GA, with her husband and two young children.
One of the biggest decisions golfers have to make when it comes to golf club specifications is whether to choose a steel or a graphite shaft. Graphite shafts are often seen as being better for slow swing speed players, but there is much more here for golfers to know and understand.
The more complex answer is that ‘control’ relates to how well a golfer can hit the centre of the club and square the club face. This depends on their swing speed, tempo and release pattern. There are many times long hitters who may gain more control from lighter, graphite shafts and visa versa.However, as great as the graphite shaft feel is, it can mask some issues. You can have a shot that feels great but does not perform as it is supposed to. This can be kind of confusing, especially for a player that is working on getting better and looking for that feedback. Typically speaking, all golfers benefit from graphite shafts in their hybrids and woods. These clubs are longer and more challenging to control, and having that graphite material makes it considerably easier to swing through the ball and release the club head. However, the core reason for graphite shafts in wood and driver are that they reduce the overall club mass. A lighter club can be swung quicker with the same amount of force. The Dynamic Gold True Temper S400 is a very popular wedge shaft on the PGA tour, and it is a stiff, moderately heavy steel shaft. Women professionals will typically choose between steel or graphite depending on their swing speed and which will blend into their set the best.Many women professional golfers use graphite shafts or lightweight steel shafts. The swing speed of women golfers tends to be a little lower, and the graphite shafts help to increase overall carry distance.Think of graphite and steel shafts as continuums that help you tweak underlying characteristics – flex, weight, torque and how the club feels when you swing. The right choice for you always lies in testing different options and check out the data.What good is distance without control? Nobody really cares that you hit a 300-yard drive three fairways over or that you can hit a pitching wedge 175 yards left of your target. One thing that makes golf so complicated is that it is a mix of distance and control performance on the golf course. Many club golfers think shafts that are too flexible are responsible for their fade. The opposite is actually true. Shafts that are too flexible load earlier in the downswing and then kick back and often result in a hook. In general, older golfers or senior players with slower swing speeds should generally use graphite shafts. However, there are many senior players who are more suited to steel shafts. As with any other golfer, it comes down to ball flight, swing speed and shot disperion, not your age.
However, to truly know which golf shaft is more forgiving for your game, you will need to go for a custom fitting. Even if a shaft feels better and seems to perform better on the course, is it really helping your scoring? Have you checked to see the stats? Beginner golfers need to find a golf club that fits their swing speed and physical capabilities. This is very easily accomplished by going to a club fitting. Almost all professional golfers, both men, and women, will use graphite shafts in their driver, fairway woods, and hybrids. These are the clubs that are all about swing speed, ball speed, and launch. The players are a bit less concerned with pinpoint accuracy and control and more concerned with maximizing their distance; graphite is the best material for that.One interesting thing that many golfers are not aware of is that shaft fitting is much deeper than just measuring your club head speed. Your launch, spin rate and every shot shape (fades/draw) can all be altered based on the shafts you have in your irons and woods.
Do any pros use Project X shafts?
Currently, there are 13 PGA Tour players playing with a True Temper Project X shaft in their bag.
Remember, not all graphite shafts are lightweight, and they can be made just as stiff as a steel shaft. The combination of extra weight and a bit less flexibility results in the control that professionals need in their irons.This Stroke Lab putter shaft improved the overall feel of the putting stroke with a partial graphite shaft while still providing stability and control that the steel can help with. The combination of graphite and steel shaft is a bit odd at first, but it has tested quite well over the last few years.
You have changed up the golf ball, worked out at the gym, even took a lesson, and the ball just won’t go more than 140. Chances are it’s time to change to a more lightweight golf shaft, which for many players is graphite, will gain you a few extra yards.We have watched shaft technology progress over the last few years and have seen graphite shafts with heavier weights and steel shafts with lighter weights.
Generally speaking, graphite golf shafts are made with lightweight materials and have lower overall weights than steel shafts. However, many players don’t understand that every graphite shaft has several weight options, just as every steel shaft has several weight options.
Golf technology and analysis scares some golfers, but the game is challenging enough! Find an expert, hit some golf shots and make the game as easy as it can be by getting the right equipment.The best way to know which shaft flex is correct for you is to go for a custom fitting session, or use a launch monitor or a golf simulator. Essentially to know if a golf shaft is the right fit, you must have data and technology that tells you it is the right fit for you.
Almost 100% of all women’s golf beginner sets will come with graphite shafts clubs throughout the entire set. Don’t assume a beginner golf set is made for all beginners. It is still up to a beginner to find something that matches the type of player they are.When choosing between an iron set that has graphite or steel, you will likely see a $100-$250 difference or so between the two sets. The difference when broken down per club may only be about $10-$30 per club.
If you ask a golfer which shaft they play with, and they answer with graphite or steel, they are not giving you the whole story. Graphite shafts and steel shafts are manufactured differently from one another and made with different materials. However, within the heading of graphite or steel, there are tens of thousands of options.
We recommend that a higher handicapper get a custom fitting to determine which golf clubs would be best for them. The things that will be looked at when testing different shafts include spin, ball speed, and also dispersion.
Come along with us as we dive into the significant differences between graphite and steel golf shafts, which ones you should use, which the professionals use, and the positives and negatives of both golf shaft materials.
So, the perfect time to switch to graphite shafts is when you need them! The answer to that question lies in going to test out grahite vs steel shafts with some clear data from a launch monitor and club fitter.
Many golfers use steel shafts in their wedges. The wedges are all about control. Would you rather hit your 56 degree wedge far or hit it within a five foot radius of the flag each time. Most will choose the accuracy, and that is where the steel shaft comes in.
At this point, you should know a lot more about the difference between graphite shafts and steel shafts. We wish it was simple enough to say that graphite or steel is better, but that is just not the way this game works. The faster your swing speed, the easier it is for you to swing with a steel shaft and still see great results. As you saw from our example with shaft weight, the heavier the shaft, the stiffer it typically is. When it comes to steel shafts, the differences in weight may be minimal, but great players can still feel them. Graphite golf shafts almost always cost more money than steel golf shafts. The reason here is the production and material costs of the graphite shafts. However, as more premium steel shafts are coming to the market, these lines in cost are becoming more blurred.There is some bad advice out there about golfers with handicaps higher than twenty switching to graphite shafts to help their game. However, the switch to graphite shafts has more to do with ball flight, swing speed and carry distance than it does with your handicap.
Typically speaking, golfers will say that graphite shafts are more forgiving because there is less vibration and a better feel at impact. In addition, it can be easier to swing through the ball with graphite shafts, resulting in an easier release of the club head.
Beginner golf sets typically don’t offer very many flexes. They often come in graphite or a steel shaft choice, and there are no real options for flex in the shaft. If you are a player with faster swing speeds, you will be directed towards the steel, while the slower swing speed player will be directed towards the graphite shafts.
One of the first things that golfers will do as they age and their swing starts to slow down is switch to graphite shafts. Graphite shafts are lighter in weight and, therefore easier to swing faster with the same amount of force. For a senior golfer that is starting to lose speed, the initial switch to the graphite shaft may help them earn all of their speed back, and feel more in control.
The putter shaft technology was never as complicated or as well studied as it is today. For so many years, a standard run of the mill steel shaft was put in a putter, and then Odyssey changed the game with their Stroke Lab putter shaft.
The feel difference between graphite shafts and steel shafts typically refers to vibration. The graphite shafts do a better job of absorbing vibration at impact and giving golfers better feel. If you have ever hit a baseball with a steel bat in the winter time, you likely know that ringing feeling that just doesn’t feel all that great.
Most male professional golfers will use steel shafts with heavier weights, many into the 120g range. However, there are professional golfers like Matt Kuchar, Abraham Ancer, and sometimes even Bryson DeChambeau will use graphite shafts in their irons.
Some players will find that they hit graphite shafts five yards further, but their dispersion rates are terrible, other high handicappers will find graphite shafts give them five extra yards and actually improve their dispersion!
As you can see, the weights decrease as the shaft gets more flexible and the starting point for the graphite stiff flex is considerably lighter than the regular flex in the steel. Of course, there are custom options that will bridge this gap between graphite and steel, but this is a good representation of the difference between graphite and steel shafts when it comes to weight.Professional golfers and low handicappers like to have a bit of a poor feel in their shaft from time to time. This is how we learn and make adjustments and eventually move on to become better players. Graphite iron shafts definitely don’t mask all miss hits, but they do a good enough job that you will generally hear graphite called the better feeling shaft.
Do graphite shafts go further than steel?
Golfers hit graphite shafts so much further than steel because they are so much lighter. It’s not uncommon for graphite irons to weigh half the amount of steel golf clubs. Lighter shafts are easier to swing faster, which leads to more clubhead speed, which corresponds to more total distance.
Every product we carry from drivers to golf bags are vetted by our team. If it doesn’t pass the test of performance and quality, it doesn’t make it to you. We started Golf Deals & Steals in 2007 with the goal of making Tour Quality Golf Clubs affordable for everyone while delivering unmatched service. The goal set over 14 years ago remains today, and we hope our passion for the game is a reflection of our service to you. Fujikura’s product lineup has a shaft for every club in your bag. We offer Wood, Hybrid, Iron, Wedge and Putter shafts for our Charter Dealers to dial-in any and every type of golf club.Yes. We have two teams of engineers in Japan and Carlsbad, CA that are dedicated to creating high-performance golf shafts, utilizing the latest science, engineering and technology available. Note – not all shaft companies design their own golf shafts. Many of our competitors use external entities to design and manufacture their shafts and do not own their manufacturing processes.
Our shafts are prototyped in both Japan and the US by two teams of engineers. We wholly own two factories that are employed by Fujikura employees that produce Fujikura high-performance golf shafts.
We have great partners throughout the US and the World that have been selected based on our Charter Dealer criteria. Our 600+ Charter Dealers are educated on all of our products through online and in-person trainings and are also provided informational documents on new product launches.*3balls dollar ($) and (%) off promotions: Promotions are only valid on 3balls.com. Only one coupon code is valid per customer per order. Due to manufacturer restrictions, all new (not including closeouts) items (including logo overruns) from Adams, Adidas, Ben Hogan, Callaway, Cleveland, Club Glove, Cobra, FootJoy, Mizuno, Never Compromise, Nike, Odyssey, PING, Sun Mountain, Taylormade, Titleist and some others are EXCLUDED. All Bushnell, Golf Buddy, Leupold, and Sky Golf products are EXCLUDED. Promotions cannot be combined with other offers. All promotions and offers including free shipping exclude all new PING product.
The 3balls team believes in making golf accessible and enjoyable for all our customers, including those with disabilities, both on the golf course and online through our website. That is why we strive to meet the World Wide Web Consortium’s Web Content Accessibility Guidelines (WCAG) 2.1 Level AA. Accessibility is an ongoing effort for 3balls. We are always searching for solutions that will improve the accessibility of our site. If, at any time, you have difficulty using or accessing any part of the 3balls website, please feel free to contact us. We will work with you to make all reasonable efforts to correct the issue and assist with immediate needs.
Ultimately, the best Project X golf shaft for you will depend on your individual swing characteristics and preferences. It’s important to work with a professional club fitter to determine the best shaft for your game.The “Variable Flex Profile” of the shaft allows for maximum energy transfer to the ball, resulting in greater distance and accuracy. The shaft has a stiffer tip section for a more responsive feel, and a softer butt section for improved control.The Ping Alta CB 55 is one of the best shafts in the field. Many people tend to buy Ping Alta shafts because they are durable and strong. In this article, we discuss the Ping Alta CB 55 shaft specs. So stick around until the end to find out what you’ve been looking for. Following…Some notable professional golfers who use Project X shafts include Justin Thomas, Rory McIlroy, Adam Scott, Brooks Koepka, and many more. In fact, Project X shafts have been used to win numerous major championships, including the U.S. Open, PGA Championship, and Masters.
Golfers who have used the Project X Hzrdus T800 Graphite Shaft have reported significant improvements in their performance on the golf course. Professional golfers and amateur players alike have praised the shaft’s advanced technology and customization options.
What is the difference between KBS Tour 120 and S300? If we’re comparing KBS Tour 120 to S300s, KBS will launch higher and have better dispersion. The S300s are weaker at 5.8 and KBS S is stronger at 6.0. The S300s would be more comparable to the KBSs at 6.1 if they were hard-stepped once….Golf is a sport that requires precision and skill, and the right equipment can make all the difference. One of the most important pieces of equipment is the golf club shaft, and the Project X Hzrdus T800 Graphite Shaft is a top-of-the-line option for golfers looking to improve their game.
The Project X Hzrdus T800 Graphite Shaft offers several customization options to fit a golfer’s swing speed and style. The shaft is available in regular, stiff, and extra-stiff flex options, and can be customized to fit a golfer’s specific swing characteristics.
Golfers can also choose from various weights and lengths to ensure the shaft fits their needs. The ability to customize the shaft allows golfers to optimize their performance on the golf course.The Project X Hzrdus T800 Graphite Shaft is a top-of-the-line option for golfers looking to improve their game. With its advanced technology, performance benefits, and customization options, it’s no wonder that so many golfers swear by this shaft. Whether you’re a seasoned pro or a beginner, the Project X Hzrdus T800 Graphite Shaft can help take your game to the next level.
